Safety and Risks

In this module:
Learning Objectives
Terms to Know
Introduction
Risks from wildlife
Environmental Risks
Risks from using tools and equipment
Reduce risks in the field (work practices)
Safety Equipment
Risks from Handling Wildlife
Risks Associated with Wildlife diseases
Attic and Crawl Space Safety
Risks Associated with Firearms
Risks from Ladders


Learning Objectives


  1. Understand that there are clear occupational risks for WCOs when performing wildlife damage management.
  2. Understand the safety issues and risks from problem wildlife.
  3. Recognize environmental risks such as severe weather, hazardous environments, water, and other dangers.
  4. Learn about the safety issues with using tools and equipment and creating safe on the job or in the field work practices.
  5. List several types of safety equipment that all WCOs should have on the job.
  6. List several risks from the direct handling of wildlife.
  7. Explain why attics and crawlspaces have certain dangers and risks, and how to be safe.
  8. Identify dangerous situations such as using firearms, flotation vehicles, or ATVs.
  9. Recognize the dangers of working with ladders – to yourself, the company, and the client.
  10. Know how to use a ladder safely.


Terms to Know



Danger Sign


Danger – is the possibility of something bad happening. A situation in which
there is a risk of something bad happening, is called dangerous, risky
or perilous.


Personal protective equipment (PPE)   Gear worn to protect people from
pesticides, contaminants, and mechanical injury (boots, gloves, goggles, Tyvek
suits, respirators).


Respirator  
A device designed to protect the wearer from inhaling harmful dusts
(some that might carry bacteria or fungi that could cause disease), fumes,
vapors, or gases.


Risk   Exposure to danger and the potential for
harm and loss.


Safety is the state of being “safe” (from French sauf), the condition of being protected from harm or other non-desirable outcomes. Safety can also refer to the control of recognized hazards in order to achieve an acceptable level of risk.


Introduction


Safety must be a top
priority for WCOs. There are many dangers from wild animals and hazardous
environments, from parasites and diseases, and from tools and ladders, and a
fickle public. This module provides information on job safety and personal
risks to help WCOs prevent injuries from on the job work or field practices in
familiar and unfamiliar, hazardous, or sensitive environments. Personal risks
come from legal, ethical, and professional choices made while performing your
job. Financial risks from poor business decisions can cause serious harm to
your company. Legal risks come from breaking the law can get you in serious
trouble. Follow state and local guidelines for fall-protection equipment,
especially when working on roofs and ladders. Follow all vehicle safety laws
and regulations by the Occupational Safety and Health Administration (OSHA).


Risks in WDM come from:


  • Environmental risks – heat, cold, water
  • On-the-job work practices (field practices)
  • Setting traps and handling animals
  • Wildlife diseases
  • Power tools
  • Boats and ATVs
  • Ladders and lifts
  • Legal and ethical challenges
  • Use and transportation of firearms


Preparation is
important for reducing the likelihood of serious emergencies while performing
wildlife damage management. Staying in shape can prevent injury, exhaustion,
and stress-related disorders. Carrying medications and a first aid kit allows
immediate treatment of minor issues in the field. Proper clothing will reduce
the effects of harsh weather conditions. Trappers should know the area they are
trapping and carry a basic survival kit including high-energy food, water, map
and compass, knife, fire starter, and signal device.


WCOs
encounter many occupational risks when performing wildlife damage management. The work is physically demanding and exposes individuals to a
variety of physical threats. WDM is not an office job. WCOs carry tools,
materials, and caged animals in all sorts of weather. Many methods of WDM
require carpentry skills and the use of hand tools and ladders. The public, and
even your customers, may or may not support your methods. Be aware of perils to
your physical health as well as your mental health. WCOs who are
physically and mentally fit and enjoy working outside will find WDM much easier
to perform. WCOs work outdoors with many potential hazards for which they need
adequate preparation so they can safely and competently perform their job.


zap
Slip and Fall


Relax, but don’t fall asleep at the wheel


“Had
this squirrel job in an old house. I stepped off my ladder onto the metal roof,
and pow! Those squirrels must have chewed through some wires that were touching
the roof. The entire thing was electrified. I was lucky I didn’t fall off the
roof.”


—Eric, NWCO in Connecticut


Develop a safety mentality. What’s the worst
that could happen? What is the potential for danger? Can the situation be
prevented? Do you have the right equipment? What are the legal issues? These
are the kinds of questions that will help you determine the safety risks of the
job.


Risks from wildlife


When
some wild species move in, they can put people and their property at risk. Some
people don’t understand the problems until the damage is done, like the ceiling
falls in or the lights go out. People may be afraid and overreact. Offer
credible information in a professional manner to help your customers make
sensible decisions about wildlife risks.



Photo by CDC


Wildlife
can pose multiple threats to humans, domestic animals, crops, health and
safety. Rodents, raccoons, and birds can cause fires by chewing wires or
blocking vents or fans with their nests. Fan motors can overheat and ignite
highly flammable nest materials. If a nest blocks a chimney, dangerous fumes
can be trapped inside. Chewed wires may cause critical electronic systems to
fail. A raccoon den in the ceiling may cause it to collapse. Wildlife can
collide with airplanes, cars, and other vehicles.


You,
your customers, their pets, and livestock might be bitten, scratched, or
exposed to a wildlife disease, such as rabies or histoplasmosis. WCOs are more
likely to encounter wildlife diseases than the average person, because they
often handle wild animals, and spend a lot of time in disease hot spots such as
attics and crawl spaces. The fur, dander, droppings, and parasites of wild
animals also can trigger allergies in some people. Wild animals can be noisy at
night, sometimes depriving people of sleep. Animals running around the ceilings
of homes can be dangerous.


Wildlife
damage can also be expensive. To gain entrance to a building, some animals
destroy parts of the exterior. Once inside, they might chew or soil woodwork
and other materials. Items stored in attics, basements, and closets are
vulnerable. Raccoons and mice often ruin insulation, causing heating and
cooling bills to rise. Chewed wires may need to be repaired or replaced, which
can be expensive. Many human-wildlife conflicts are related to people’s safety,
health, and protection of their property. There are risks and safety issues
associated with performing wildlife damage management and there are risks from
wildlife if preventive measures are not performed. 


Environmental Risks


Environmental
risks include working in hazardous weather conditions, dangerous habitats, and
exposure to unknown or unseen materials and substances. Landscapes vary and
contain a variety of obstructions from trees and fences to streams and beaver
dams. Embankments, water sources, stones, trash, even syringe needles, all
create real and substantial risks for WCOs from the failure to understand their
particular dangers. Heat stroke or frost bite can be a real problem. Wildlife
damage management is outdoor work even if performed in urban settings.


Heat-related illnesses


“I was removing a large starling nest from an attic. The nest was 6–8
feet tall and almost as big around. Because of the dust, I was wearing a
respirator. I wasn’t moving around much, just bagging up the nest. After an hour,
I noticed I was getting light­headed. As soon as I moved, the dizziness really
hit me. It was all I could do to get to the ladder and get down in one piece.
If I hadn’t recognized the symptoms I could have collapsed up there and maybe
died from the heat.”


— Wayne Langman,
NWCO in Indiana


WCOs need to go where the animals are. Often, that takes you into an enclosed space that’s hot and stuffy. To make things worse, there’s a good chance you’ll be wearing protective gear that will make you even hotter. This can lead to a variety of heat-related conditions, such as heat rash, heat cramps, heat exhaustion, and heat stroke.


Heat stroke is the
most serious condition—it’s a life-threatening emergency. Heat stroke can kill
quickly or cause permanent brain damage. Your body temperature can rise to 106°F or higher within 10 to 15 minutes.


Milder forms of
heat-related illnesses, such as heat exhaustion, can develop into heat stroke
if untreated. Even the milder conditions can be serious for NWCOs because they might
lead to accidents, especially falls. Dizziness, fogged safety glasses,
slippery, sweaty palms, compromised balance, and outright fainting could make
you fall off a ladder or beam.


Under hot
conditions, some workers can lose as much as 2–3 gallons of water a day through
sweat. You need to drink about as much water as you lose to sweat to avoid
dehydration.


Buildings
can be dangerous. Nails, splinters, and broken wood or other building
structures can be safety issues. A respirator (PPE) may be necessary to protect
your lungs from dust and other air-borne contaminants (Figure 1). Other risks
include unseen or unknown structural problems, and electrocution from damaged
or unseen electrical lines. Slips and falls, bending and ildlife
damage management is outdoor work even if performed in urban settings.


Heat-related illnesses


“I was removing a large starling nest from an attic. The nest was 6–8
feet tall and almost as big around. Because of the dust, I was wearing a
respirator. I wasn’t moving around much, just bagging up the nest. After an hour,
I noticed I was getting light­headed. As soon as I moved, the dizziness really
hit me. It was all I could do to get to the ladder and get down in one piece.
If I hadn’t recognized the symptoms I could have collapsed up there and maybe
died from the heat.”


— Wayne Langman,
NWCO in Indiana


WCOs need to go where the animals are. Often, that takes you into an enclosed space that’s hot and stuffy. To make things worse, there’s a good chance you’ll be wearing protective gear that will make you even hotter. This can lead to a variety of heat-related conditions, such as heat rash, heat cramps, heat exhaustion, and heat stroke.


Heat stroke is the
most serious condition—it’s a life-threatening emergency. Heat stroke can kill
quickly or cause permanent brain damage. Your body temperature can rise to 106°F or higher within 10 to 15 minutes.


Milder forms of
heat-related illnesses, such as heat exhaustion, can develop into heat stroke
if untreated. Even the milder conditions can be serious for NWCOs because they might
lead to accidents, especially falls. Dizziness, fogged safety glasses,
slippery, sweaty palms, compromised balance, and outright fainting could make
you fall off a ladder or beam.


Under hot
conditions, some workers can lose as much as 2–3 gallons of water a day through
sweat. You need to drink about as much water as you lose to sweat to avoid
dehydration.


Buildings
can be dangerous. Nails, splinters, and broken wood or other building
structures can be safety issues. A respirator (PPE) may be necessary to protect
your lungs from dust and other air-borne contaminants (Figure 1). Other risks
include unseen or unknown structural problems, and electrocution from damaged
or unseen electrical lines. Slips and falls, bending and lifting are common
sources of workplace injuries. WCOs move and carry a lot of equipment over
different terrains. Exercising awareness of surroundings is critical for
safety.


Some
of the wildlife removal methods can be dangerous and create safety issues. In
part, regulations on wildlife control methods are geared towards making them
safer for people, animals, and the environment. An improperly set trap may
capture or injure the wrong animal, and could be hazardous to people if
improperly set. If misused, toxicants can be a danger to people, pets,
livestock, and other non-target wildlife. Pesticides can contaminate water,
soil, and air.


Proper
clothing and the use of personal protection equipment (PPE) will help WCOs be
safe in most environmental working conditions. Gloves, boots, and eyewear
should be routinely worn to protect from communicable wildlife diseases,
roundworms, and other parasites. Heavy clothing will provide some protection
from bites, scratches and other abrasions as well as tick borne diseases. Make
sure you carry basic safety and equipment and a first aid kit in your truck.


In
urban and suburban neighborhoods, there may be risks and dangers from people in
the community. Public attitudes towards WCOs vary, and there is the potential
that people may vandalize work vehicles and attempt to steal traps and
equipment. Protect yourself, your property, and your reputation if you have
cause to be alarmed. 


Risks from using tools and equipment


Dangerous tools and equipment


  • Power tools
  • Ladders
  • Traps
  • Blade knife


The tools that are required
for jobsites and field work can pose safety risks to the user. Setting up a
32-foot ladder presents the risk of back injury as you place the ladder, and
the risk of falling from the ladder when using it. The proper use of
commercial-quality equipment prevents many injuries. Body gripping traps are
dangerous and require additional training. High-quality commercial traps work
better and are safer than inexpensive ones. Power equipment is dangerous and
low-quality tools are often the most dangerous as they can fail under stress.
Always choose quality equipment rated for the level of activity being
performed. Remember, professionals need professional equipment. Keep all
equipment in optimal working condition, read and follow all manufacturer
instructions, become familiar with BMPs for trapping and obtain additional
equipment training whenever possible.


Reduce risks in the field (work practices)


Many risks related to using equipment are based on proper
work and field practices. Safety must be learned and practiced and is a
critical component of on the job training.


Remember the old proverb, “familiarity breeds contempt” when dealing with safety issues. Pay attention to what you are doing.


When you become comfortable, you may become complacent. Complacency can result in injuries. The best safety equipment is useless if the WCO fails to use the equipment or lacks awareness of the threats posed by its misuse.


Clothing


Shoes should cover your entire foot and be comfortable to wear.
Soles should be soft to reduce damage to roofs and slip-resistant to reduce the
risk of falling. Safety shoes with impact-resistant toes and insoles protect
against injury. Good work boots provide stability on unfamiliar terrain.


Shirts should be comfortable and loose fitting to allow freedom of
movement in tight areas. Wear a long-sleeved shirt or jacket for protection
from the sun, abrasion, and other environmental hazards.


Pants should be comfortable and allow for full leg movement. Choose
pants made of material resistant to abrasion from kneeling and squeezing into
small spaces. Generally, long pants are preferred.


Disposable coveralls should be used in areas that could be
contaminated with diseases or when working with toxicants. If you use any
pesticides such as toxicants or repellents, follow the label regarding use and
laundering of clothing.


Hats and helmets
are useful for protecting your face from the sun and cushioning bumps to the
head. Hats are particularly necessary to protect the eyes of those who wear
corrective lenses. Choose hats with adjustable clasps. Helmets provide added
protection in case of a fall and reduce the risk of puncture injuries.


Field situations requiring additional caution and special equipment


Entering attics and crawl spaces requires:


  • leather gloves,
  • half-mask respirator,
  • head-lamp, a second light, and
  • eye protection


The use of power tools requires:


  • eye protection, ear protection, and
  • dust mask or half-mask respirator.


The use of ladders requires:


  • choice of the right ladder,
  • ensuring it is firmly planted,
  • attaching tie offs or ladder straps,
  • consideration if you need help
  • awareness of power lines.


Trapping and handling animals requires:


  • leather gloves, and
  • other items such as cat tongs or catch poles.


WCOs must learn how to safely set and release at least one type of foothold trap and one type of bodygripping trap if they do any trapping.


Safety Equipment



Flashlights and good lighting are critical for safety. In fact,
good lighting can prevent the need to enter hazardous situations. Three types
of lights will be useful in most jobs.



Flashlight for wide-area illumination. Headlamps provide hands-free lighting. Photo by Jan Hygnstrom.


A general inspection light can be a simple, hand-held light used to
illuminate closets and walking areas (Figure 2).


Special inspection lights must provide at least 2500 lumens. They
are powered by rechargeable batteries and will illuminate dark areas during
daylight hours.


Head lamps are useful when your hands need to be free, such as when
inspecting an attic or crawl space, joists, or under a deck.


Leather gloves have many uses. WCOs should have a pair for general protection and a thicker pair for handling animals. Some WCOs prefer welder’s gauntlets. Bite gloves made with embedded metal rings or gloves made from Kevlar are especially useful in handling animals. Select gloves that that are comfortable and that you will wear frequently. Leather gloves should be large enough to fit over latex or nitrile gloves worn underneath (Figure 3) to provide additional protection with certain types of contamination such as bodily fluids. We recommend that you always wear gloves while performing any wildlife control activity.



Gloves are essential safety items. Photo by UNL.


Knee pads protect your knees when
crawling in attics and crawl spaces.


A respirator may be one of the most frequently used pieces of safety
equipment that you carry to the job.



Half-face mask suitable for routine attic inspections. Photo by Wildlife Control Supplies.


Before using a respirator, obtain a
medical evaluation to ensure you are healthy enough to use it. Have a fit test
to see that it fits properly. A good feel does not necessarily mean a mask has
a good seal. Replace filters according to manufacturer recommendations. Select
a half-face respirator with a particulate-filtering face piece (Figure 4) rated
at N100 by the National Institute for Occupational Safety and Health (NIOSH). This
respirator will be sufficient for most general inspections of attics and
basements.


Use a full-face mask when
performing cleanouts of attics or basements, or when the risk of airborne dust
is high. OSHA requires employers to establish and maintain an effective
respiratory protection program for employees. The respiratory protection
program will cover the medical evaluation, fit testing, cleaning and
maintenance of masks, training, and work area evaluation. Consult OSHA.gov for
the latest guidelines on how to implement this requirement.


Keep a first aid kit in your service vehicle. Cuts and scrapes
frequently. A kit should include Band-Aids®, gauze bandages, tape, antiseptic
ointment, and triangular bandages, and treatments for bites, stings, and
scratches.


Waterless hand sanitizer reduces the risk of infection when soap
and water is not available. Choose a brand containing at least 60% alcohol.
Smear a light coating over your hands to kill bacteria. Work it around your
hands and between your fingers until they are dry. Cloth wipes have the added
benefit of helping to scrub away organic material where germs can hide.


Helmets that fit properly can help to protect your head in crawl
spaces and attics. Helmets seldom are worn by WCOs in residential settings.
They are cumbersome and sometimes a detriment when they obstruct your view.
Helmets diminish headlamp light unless you have a hardhat with a headlamp built
in. Some commercial contracts may require you to wear a hardhat while on the
jobsite.


A bump cap provides an alternative to a helmet. They offer no
protection from falling objects, nor are they rated for electrical protection.
They offer sufficient protection, however, for crawl spaces and attics.


Eye protection is critical when working with materials that can
spray or fall into your eyes. Wear a full-face mask if biologically hazardous
dust, aerosolized feces, or other potential contaminants are present.


A medical history will alert your doctor to consider some of the
wildlife-related diseases that normally are not considered for other patients. Tell
your doctor that you are in contact with wildlife in your occupation.


Safety equipment is not to be
confused with on the job safety practices such as preventing injuries from
daily routines (lifting, bending, etc.) and the use of power equipment.
Performing exclusion work, cutting boards, metal and wire, can be dangerous.
Become familiar with the safety features on saws, drills, cutting plyers and
other equipment. General construction has many risks and causes many accidents.


Risks Related to Driving



Image by the Shield Agency


Getting to the job has its own dangers. Accidents, vehicle
collisions, and basic motor vehicle infractions can cause lots of problems for
you and your company. Safe driving is essential for managing your business.
Prevent vehicle accidents by keeping your vehicles properly maintained. Insure
that lights, tires, and other equipment are working properly. Do not leave your
truck full of garbage, refuse, caged animals or dead carcasses. WCOs should
consider taking additional safe driving courses to reduce their insurance
liability and improve their awareness.


If you happen to perform agricultural wildlife control, you
may need additional training in using all-terrain vehicles and/or other
vehicles made for accessing remote locations. Vehicles are dangerous and cause
numerous personal injuries. If you run a large company, a vehicle safety
program is required.


If you use boats, take a boater education course. Always
wear a Coast Guard approved personal flotation device (PFD). Do not overload
boats. Avoid boating during severe weather. Take extra care when navigating in
or near dangerous currents in rivers, tidal areas, and around dams or other
obstructions.


Risks from Handling Wildlife



Bite proof Kevlar gloves. Image by RAPICCA


Wildlife are unpredictable and many WCOs
have underestimated the strength, quickness, and agility of animals. While an
attack from an animal is unlikely, it can occur when animals are startled, such
as when your head emerges into an attic or crawl space or when a parent
believes their young may be in danger. Animals can cause injury through bites
and scratches.


Keep your distance from animals. You cannot
be bitten or scratched if the animal cannot touch you. In addition, distance
helps reduce the likelihood of ectoparasites (fleas, ticks, etc.) moving from
the animal to you. If you cannot keep your distance, use tools such as catch
poles, snake tongs, or cat graspers. When there is a choice between being
bitten and the animal escaping, let the animal get away.


When
cage trapping, use professional-grade traps with 1 x ½-inch mesh and oversized
handle guards to prevent getting clawed. Wear protective clothing such as heavy
gauntlet gloves, long pants, and a long-sleeved shirt when handling traps with
animals. Cover the trap with a cloth to help calm a captured animal and to
protect yourself as you carry it. Hold the trap away from your body.


Unseen Danger – Caged Animals on Roofs


One of the most dangerous activities
performed by a WCOs is to carry a caged animal while climbing down a ladder.
Carrying a cage on a ladder violates the “3 points of contact” rule, as you
will be using the ladder with only one hand. The weight shift that occurs when
an animal moves from one end of the trap to the other is another danger. The
weight shift can cause you to lose your balance, drop the animal, and fall.
This is a particular risk when working with raccoons, which have a tendency to
move from one end of the trap to the other when they see the ground below.
Instead of carrying the trap, use a towline to lower the caged animal.


Bites
and stings


When practical, avoid situations in which
you might get bitten or stung, especially if you’re allergic to wasp or bee
stings. Carry a can of wasp insecticide in your truck. There’s gear that can
help protect you from bites, such as animal handling gloves, catchpoles, and
traps with protective plates around the carrying handle. In some cases, a
strategic retreat may be in order. If holding onto the animal means you’re
probably going to be bitten, maybe you just let it go and then try again. If
you are bitten by a wild animal call your local Health Department for advice.


Risks Associated with Wildlife diseases


“Zoonotic diseases” are illnesses that
people can catch from animals or from contact with their habitats. There are
hundreds of zoonotic diseases but only a few are common in most WCO work.
(Wildlife Diseases are covered in Module 3.)


Risks associated with ladders are far more
significant for WCOs, but some wildlife diseases can also be fatal to people.
Even if you’re comfortable with your personal risk, you owe it to your
customers to be cautious. You have no way of knowing how healthy they are; some
may have compromised immune systems.. A disease you could shrug off might be no
laughing matter for them. All of this is especially true in the time of the
Covid-19 pandemic.


Diseases can also spread to other wildlife
species and devastate their populations, a problem if the affected species is
endangered or a prized game species.


As a professional, behave in ways that
minimize the risk of exposing others to disease and help prevent the spread of
the disease to other areas, or other species. Having the proper attitude about
controlling disease influences your animal handling and disposal procedures,
your choice of gear, customer education, and clean-up strategies for the site
and your equipment.


Rabies is a prime example of the important
role WCOs play in protecting public health. Rabies is so widespread in wildlife
in the Northeast that the state health department recommends treating any
skunk, raccoon, or bat you approach as “rabid until proven innocent.” This
disease is always fatal once symptoms appear. Yet there are only about one or
two human deaths caused by rabies each year in the U.S., according to the CDC
(Centers for Disease Control and Prevention). One reason for this remarkably
low number is the vigilance of health department staff, WCOs, veterinarians,
and many others.


Attic, ceiling, and Crawl Space Safety



WCOs are exposed to environmental risks on the job. Wear a respirator and gloves when inspecting drop ceilings. Photo by Jan Hygnstrom.


When you work in attics and crawl spaces,
you should take an OSHA-certified training course for working in confined
spaces. In general, keep a supply of drinking water handy. Beware of heat
stress, especially in hot weather when in an attic or crawl space. Wear
appropriate personal protective equipment (PPE). Always carry 2 sources of
light and have another person present if possible. Wear clean gloves so you do
not leave smudge marks on the doors and walls.


Ask your client to clear the area to allow
access to attic and crawl spaces. Perform an exterior inspection to reduce the
need to enter an attic or crawl space.


If entry is required, there may be a
staircase that leads to the attic. In many cases, you will need a ladder. To
protect yourself from falls, use a ladder brace, ropes or bungee cords, and
helmet or head protection.


Put on a HEPA filter mask or the equivalent
before opening the attic hatch. Wear it when in the attic and while conducting
clean-outs.


Whenever possible, distribute your weight on
two joists while holding onto rafters. If possible, create a path by laying 2 x
6- or 2 x 8-inch boards across the joists and anchoring them with screws. The
boards provide a stable platform and will distribute your weight more evenly.
Joists can flex and break. If you sense the joists are bowing too much or seem
too weak to hold your weight, DO NOT CONTINUE. Leave the attic carefully.


Carefully shine a light around the entire
attic or crawl space and look for signs of animals. Attics and crawl spaces can
have other hazards such as protruding nails, old or damaged wiring, previous
use of toxicants, and fiberglass.


Risks Associated with Firearms


Shooting is appropriate in certain
situations, especially for field dispatching animals, however shooting requires
training and skill. Safety concerns and legal restrictions must be considered
before shooting. For proper training in the use of firearms, attend a hunter education
course or a training course sponsored by the National Rifle Association (NRA).


Safe firearm handling practices when trapping include:


  1. Treat every gun as if it’s loaded.
  2. Transport firearms unloaded and only load them prior to making a shot.
  3. Always point the muzzle in a safe direction.
  4. Keep the safety on and fingers outside the trigger guard until ready to shoot.
  5. Be sure of the target and what is in front of and beyond it. Close shots can ricochet off hard objects after passing through the animal.
  6. Do not make “contact” shots by touching the muzzle to the animal. Always fire from at least several inches away.
  7. Wear eye and ear protection.


Risks from Ladders


The most dangerous thing you
handle isn’t furry


“I was working on this bird job in an equipment shed. We were nearly
done; I just needed to treat one last area. I was using a 20-foot straight
ladder, but the roof was about 15 feet in that spot. Instead of getting a
shorter ladder, I set the long one against the rafter and started up. Just as I
reached the rafter, the ladder slipped, and down I went. End result: cracked
rotator cup in my elbow, dislocated toe, multiple fractures in my feet, large
gash across my knee.”


—Wayne Langman, NWCO in Indiana


Ladders may be one of the most
dangerous tools used by WCOs. The term “ladder” will refer to all devices used
to reach elevated or descended distances. Choose ladders rated 1 or 1A for
industrial use. You should have a 6- to 8-foot stepladder for entering attic
crawl spaces, a 14- to 18-foot ladder for one-story structures, and a 28- to
32-foot ladder for two-story structures.


Like contractors, WCOs spend a lot of time on ladders and
roofs, but unlike roofers, WCOs also contend with another hazard: the
unpredictable actions of wild animals. Carrying a trap containing a scared or
aggressive animal down a ladder is a bit more exciting than toting a bucket of
nails. So WCOs have a few more items to add to their list of safety issues.


Safety precautions can be a pain and slow you down. It may
be hard to justify taking the time during the busy season to implement safety
procedures, especially if you just need to quickly check a trap and you have so
many other jobs waiting. Few people die from diseases they caught from
wildlife, but accidents associated with ladders are fairly frequent and often
serious. Falls account for a significant percentage of the deaths from all
job-related injuries. When you include accidents at home, falls were the fourth
leading cause of death from in­jury, and the number one cause of
hospitalizations. These statistics include all occupations using ladders and
working off the ground, not just nuisance wildlife control.


Accidents usually happen when someone is hurried or
distracted and not concentrating on safety. Sometimes the condition of the
ladder is at fault. Sometimes it’s your shoes, or wet or icy conditions. Wind
might overcome the stability of the ladder and tip 15 feet in that spot. Instead of getting a
shorter ladder, I set the long one against the rafter and started up. Just as I
reached the rafter, the ladder slipped, and down I went. End result: cracked
rotator cup in my elbow, dislocated toe, multiple fractures in my feet, large
gash across my knee.”


—Wayne Langman, NWCO in Indiana


Ladders may be one of the most
dangerous tools used by WCOs. The term “ladder” will refer to all devices used
to reach elevated or descended distances. Choose ladders rated 1 or 1A for
industrial use. You should have a 6- to 8-foot stepladder for entering attic
crawl spaces, a 14- to 18-foot ladder for one-story structures, and a 28- to
32-foot ladder for two-story structures.


Like contractors, WCOs spend a lot of time on ladders and
roofs, but unlike roofers, WCOs also contend with another hazard: the
unpredictable actions of wild animals. Carrying a trap containing a scared or
aggressive animal down a ladder is a bit more exciting than toting a bucket of
nails. So WCOs have a few more items to add to their list of safety issues.


Safety precautions can be a pain and slow you down. It may
be hard to justify taking the time during the busy season to implement safety
procedures, especially if you just need to quickly check a trap and you have so
many other jobs waiting. Few people die from diseases they caught from
wildlife, but accidents associated with ladders are fairly frequent and often
serious. Falls account for a significant percentage of the deaths from all
job-related injuries. When you include accidents at home, falls were the fourth
leading cause of death from in­jury, and the number one cause of
hospitalizations. These statistics include all occupations using ladders and
working off the ground, not just nuisance wildlife control.


Accidents usually happen when someone is hurried or
distracted and not concentrating on safety. Sometimes the condition of the
ladder is at fault. Sometimes it’s your shoes, or wet or icy conditions. Wind
might overcome the stability of the ladder and tip you over.


If you run a small business, it’s up to you to decide how
much risk you’re comfortable with; however, if you have ten or more workers,
you’re covered by OSHA regulations. Even if your business is exempt, you may
still want to check out their website, www.osha.gov/SLTC/fallprotection/index.html.


Ladder Safety


Choose the correct ladder for the
situation. Ensure each ladder is rated for the total amount of weight it will
bear when in use. Several options are available, including step ladders,
extension ladders, platform ladders, and mechanical lifts. If you will be on a
roof, you may need to use fall-protection equipment.


Check all ladders for damage and
defects before each use. Ladders should not be bent. They should not have
splinters, damaged welds, or loose or damaged parts. The rubber fittings on the
feet of a ladder should be in good condition. If they are not, replace them.
Check stabilizers and levelers. Replace unsafe parts with parts approved by the
ladder manufacturer. If you doubt the integrity of a ladder, mark it as unsafe
and dispose of it.


Before moving a ladder into place,
check the area for potential hazards such as holes, ledges, power lines, tree
limbs, or other items that could interfere with safe placement of the ladder.
Get help if you need assistance in placing the ladder safely. As a rule,
ladders taller than 16 feet (extending to 32 feet) require two workers. Never
drag or drop a ladder. Ensure that the ladder is level and properly stabilized
so it will not wobble.


Never stand on the top 3 rungs of a
ladder. All steps and rungs should be clean and free of debris or other items
that could cause slips. Never lean or reach to the side; your shirt pockets
should not extend beyond the sides of the ladder.


Never move a ladder while you or
anyone else is standing on it. Always move or reposition a ladder while you are
standing on the ground. Check for anything that could interfere with climbing
and descending a ladder. Always have your hands free when climbing a ladder.
Raise and lower items with a rope and bag or bucket while on a ladder.


Follow manufacturer instructions
for placing ladders at a safe angle. For a roof edge that is 20 feet high
(rise), the base of the ladder should be 5 feet out from the eave (run) to
achieve a 4:1 rise-to-run ratio. The top of the ladder should extend 3 feet
above the roof. To test for proper alignment of the ladder, place your feet at
the base of the ladder and extend your arms straight forward and parallel to
the ground. If the angle is appropriate, the palms of your hands should reach a
rung on the ladder.



Diagram of the proper positioning of a ladder
(4:1 ratio of rise to run). Image from PFW


Ensure that the locks on a ladder are engaged before
climbing. Properly secure the ladder to a strong structure, especially if you
are going to step off the ladder onto a roof or if you will be working on the
ladder for any length of time. Keep the bottom of the ladder from slipping by using
braces, ladder straps, or an anchor board. Secure the top of the ladder to the
structure with tie offs to prevent horizontal sliding. Free training on basic
ladder safety is available online at http://www.wernerladder.com.


The likelihood of falling from a ladder is not related directly
to your size or weight. Climb slowly and surely. Always face the ladder and do
not lean off the side. Keep 3 parts of your body in contact with the ladder at
all times, including both hands and a foot or both feet and a hand. Knees do
not count as a point of contact.


Do not carry heavy or bulky items as you climb. Pull items
up with a towline, attach them to your tool belt, or have them handed to you. Wear
shoes with strong soles and keep them clean for maximum traction. If you don’t
feel safe, don’t do it. You can always rent a bucket lift. The rental costs can
even make sense financially, because you could lose a lot more money if you had
an accident that keeps you away from work for a long time. Rent a bucket lift.
The rental agency will provide instructions.



Bucket lifts can provide a safer and more efficient way to work in high areas. Photo by Stephen M. Vantassel.


Dismount by
stepping sideways onto the roof. The ladder should extend 3 feet above the edge
of the roof to eliminate the option of stepping over the ladder. Temperature
fluctuations in the spring and fall can cause slippery conditions due to condensation.
To check traps or other devices without climbing onto a roof, fasten a car
side-view mirror onto a long pole. Raise the pole to see the trap or device from
the ground.


Anchoring Tips – Prevent Kick Out with
Ladders


  1. Move a vehicle bumper close to the base of a ladder.
  2. On a deck or wooden surface, get permission to anchor a 2 x 4 board behind the ladder with screws.
  3. On soil, use long stakes to anchor the base of the ladder to the ground. First call Dig Safe® or a similar company to locate underground utilities.
  4. The ladder must be as firm as possible. The base must be flat, level, and secure. Use equipment to stabilize the base if the ladder is on uneven ground. If you cannot secure the base, choose another place for the ladder.
  5. Inspect equipment frequently and do not use damaged ladders. Replace lanyards and harness after a fall.
  6. Pad ropes so they do not chafe against roof edges.
  7. Be aware of electrical services to avoid electrocution. Use fiberglass ladders when working near power lines. Ask an electrical company to shield wires.


Carry a cell phone and have two people present on jobs with
extensive ladder work. In some localities 2 people are required if the work is
at or above a certain height. For more details on the proper use of ladders,
see the OSHA website (www.osha.gov). Other sources
of advice include the building industry and ladder manufacturers. Roofers have
extensive, relevant experience working with ladders.


Moving Ladders


During
transport, vibration and jostling can damage ladders. Install heavy-duty ladder
racks on service vehicles. Quality ladder racks protect the ladder from damage
and reduce the likelihood of losing a ladder. Always check that ladders are
secured properly to the vehicle before leaving the service site.


Ladder Accessories


Ladder tie offs attach ladders to gutter spikes to prevent sliding.
Wind gusts can push ladders off structures, leaving you stranded on the roof. A
falling ladder may hit someone on the ground.


Stabilizers can reduce lateral motion by widening the contact of a
ladder with a structure (Figure 5). Some stabilizers are constructed to allow
you to place each leg on a separate wall at the corner of a house.


Fall-protection equipment may be needed for some jobs. Situations
that involve steep roofs and elevated platforms require special equipment such
as a rope, lanyard, and harness. Use a rope rated for climbing. These tools are outside the
scope of this module, but you should be aware they exist. Seek proper training
in the use and selection of fall-protection equipment and use it when
appropriate.


Ladder straps anchor the base of a ladder to poles or other secure
objects to prevent ladder kick outs (when the base of the ladder dislodges from
the ground).



A stabilizer helps to keep a ladder away from a structure and increases stability. The electrical power line should be shut off before placing a ladder at a location such as this. Photo by Stephen M. Vantassel.


Ladder Storage


Protect ladders from the elements.
Ladders should be stored by themselves. Nothing should be placed on top of
ladders. Follow manufacturer guidelines on the storage of ladders to prevent
warping and other damage.


Step Ladder Safety


Select a step
ladder appropriate in height and use for your situation. Reduce fatigue by
using a platform step ladder when you will remain in one location for an
extended period of time. Fully extend and press the locks into place before
climbing. Only stand on rungs designed to be used as steps. Never stand on the
top 2 steps or use a step ladder when it is closed. Always stand in the middle
of each step.


More to Consider:


  1. Check the OSHA website (www.osha.gov) for more information about respirators and fall protection.
  2. Find out which types of wasps most frequently sting people. Are there any harmless insects that could be mistaken for them?
  3. Take training in first-aid and CPR (cardiopulmonary resuscitation).
  4. Study the wildlife diseases module in this manual.
  5. Become familiar with the dangers of using chemicals, repellents, and toxicants.